Frequently Asked Questions

Device Drive Installation

Suspend-to-Disk Partition

1. Copy the file d:\s2d\0vmakfil.exe to a bootable disk, where d: is the CD-ROM drive.
2. Boot up from the bootable DOS disk.
3. From a:\, type 0vmakfil -pXX,
4. where XX is at least the amount of system memory installed plus 2 MB for video RAM.
5. Recommended parameter: -p100.

WINDOWS 95x

USB (Universal Serial Bus Driver)

Windows 95

1. Insert the Windows 95B CD-ROM with USB Supplement.
2. From the Start menu, run d:\other\usb\usbsupp.exe.
3. Scandisk will start. After it finishes, allow it to shutdown and restart Windows.
4. When asked to insert the Windows 95 CD-ROM or the location of uhcd.sys,
5. type in C:\Windows\System as the path.
6. Continue with Core logic setup to set up other devices.

Core Logic Chipset Driver

Windows 95C

1. Please download the Core Logic Driver .
2. Extract the file into an empty directory, and run Setup.
3. Windows will ask you to reboot the system.
4. When Windows restarts, several hardware devices will be found.
5. Do not answer Yes to the restart prompts until you see the Windows desktop.
6. After restarting Windows, the core logic setup is finished.

Windows 95B/C (Socrus T)(Socrus)

1. See instructions for installing USB support.
2. From the Utility CD, run d:\setup, where d: is the CD-ROM drive.
3. After the system reboots, several "New Hardware Found" prompts will appear.
4. Do not restart until Windows Desktop appears.
5. PCMCIA wizard will start. Answer No to the two questions,
6. then select Finish and reboot the system.
7. During hardware detection, Setup will prompt you for Audio device drivers.
8. Enter "d:\5033\drivers\audio\95" as the location of the driver.
9. When you are asked for drivers for the gameport joystick,
10. just use the Windows default driver.
11. You may be asked for the location of a file. Enter C:\windows\system.
12. Core Logic Setup is now complete.

Video Driver

Windows 98

1. Go into Control Panel / Display / Settings.
2. Move the Desktop Area slider right to 800x600,
3. and check the box for Show settings icon on task bar.
4. Then, click on Apply. Restart Windows when prompted.

Windows 95

1. Go into Control Panel / Display / Settings / Advanced Properties.
2. In the screen for Adapter, click on Change.
3. Enter D:\vga\95 as the path. Select Trident 9660/9680/938X,
4. Linear Accelerator for PCI (v.5.00.10.TW.1403)
5. Click on Monitor/Change. Select Show All Devices,
6. and select Laptop Display Panel 800x600.
7. Click on Close to return to the Settings screen.
8. Move the Desktop Area slider right to 800x600,
9. and check the box for Show settings icon on task bar.
10. Then, click on Apply. Restart Windows when prompted.

Windows NT 4.0

1. From Control Panel,
2. select Display / Settings / Display Type / Change / Have Disk / d:\drivers\vga\nt40
3. Select Trident Video Accelerator (#11044 11/07/97)
4. Click on OK to return to Display Properties, and OK again to restart Windows NT.
5. After Windows NT restarts, go to Control Panel / Display Properties.
6. Set Desktop Area to 800x600. Select Test to test the configuration, and then Apply.

Audio Driver

Windows 98

1. After installing Windows, you will see 3 unknown devices listed under Other devices.
2. Go to Control Panel / System / Device Manager.
3. For each unknown device, check Properties / resources.
4. If the resources shows I/O 800-807, go to Driver / Update Driver.
5. The device driver update wizard will start. Choose to display a list of drivers,
6. and select Sound, Video, Game Controllers as the hardware type.
7. Select ESS Technology / ES 1869 Control Interface (WDM).
8. Click on Yes to confirm the driver, and click on Next and Finish.
9. If the resources shows I/O 220-22F and etc, DMA 0 and 1, IRQ 5,
10. then go to Driver / Update Driver. The device driver update wizard will start.
11. Choose to display a list of drivers,
12. and select Sound, Video, Game Controllers as the hardware type.
13. Select ESS Technology / ES 1869 Plug and Play Audiodrive (WDM).
14. Click on Yes to confirm the driver, and click on Next and Finish.
15. If the resources shows I/O 201-201, go to Driver / Update Driver.
    The device driver update wizard will start. Choose to display a list of drivers,
    and select Sound, Video, Game Controllers as the hardware type.
    Select Microsoft / Gameport Joystick.
    Click on Yes to confirm the driver, and click on Next and Finish.

    Windows 95
    Please see core logic setup for installation of audio driver.

    Windows NT 4.0

    1. From Control Panel, go to Multimedia / Devices / Add.
    2. Select Unlisted or Updated Driver,
    3. and enter D:\driver\audio\nt40 as the directory.
    4. Select ES1888/1887/1868/1878/1869 Audiodrive v.2.00.41
    5. Use the following settings:
    6. I/O Address 220, Capture IRQ 7, Capture DMA 1, MPU401 :
    7. I/O Address 320, Playback DMA 0.
    8. Restart Windows.

    PCMCIA Driver

    Windows 95B (Socrus and Socrus T)
    Please see core logic setup for installation of pcmcia driver.

    Windows 95C / 98 (Socrus)

    1. Please download the O2 Micro 6832 PCMCIA driver .
    2. Extract the files from the downloaded file.
    3. Run Setup.
    4. Choose to Install driver and restart the computer.
    5. After Windows has restarted, PCMCIA wizard will appear.
    6. Answer No to the two questions, then select Finish.
    7. Windows will shut down. After you restart the computer,
    8. the PCMCIA installation is done.

    Windows 95C (Socrus T)
    Please see core logic setup for installation of pcmcia driver.

    Windows 98 (Socrus T)
    Windows 98 will automatically set up PCMCIA, so no additional drivers are necessary.

    Windows NT 4.0 (Socrus and Socrus T)

    • Insert the modem or network card(s) before boot up.
    • To install Network:
      1. Go to Control Panel, and click on Network.
      2. Then answer yes to start installing Networking.
      3. Follow on-screen instructions.
      4. When it asks for Network Adapter, select Start Search.
      5. If it doesn't find the network card,
      6. go to Select from List, and click on Have Disk.
      7. After confirming Protocol and Clients, restart Windows NT.
    • To install Modem:
      1. Go Control Panel, and click on Ports.
      2. If there is not a COM3, add it manually.
      3. Make certain that you are using COM 3 IRQ 5.
      4. Reboot the system if the port is added.
      5. In Control Panel, select Modem, and select Add.
      6. The Install New Modem screen will appear.
      7. Select Next to allow Windows to search for new modem.
      8. It should first search for a Modem on COM 3,
      9. and finds and queries the modem you inserted.
      10. Windows will normally find the modem as a Standard Modem.
      11. You can then select Change to select from a list of modems,
      12. or to insert a Modem driver disk click on Have Disk.
      13. After files are copied, click on Finish, then you can start using the modem.

    Power Profiler

    Windows NT 4.0 (Socrus T)

    1. Insert the utility CD.
    2. Run d:\5033\drivers\powerpro\nt40e\setup.
    3. Follow the wizard to complete installation.

    
    
    Last Modified : 1998/8/20
    Copyright© 1998 IPN AB